How to Prepare Your Concrete Surface for Coating Application

1 Day Concrete Coatings for Greater Cleveland, NE Ohio, & Western PA!

Sale Ending Soon 08-01-2024

$500 OFF 3 car garage!
& $300 OFF 2 car garage!

Superior Concrete Coatings for Greater Cleveland, NE Ohio, & Western PA

5/5
 
Home » Garage Floor Coatings for Chardon OH » How to Prepare Your Concrete Surface for Coating Application

How to Prepare Your Concrete Surface for Coating Application

  CONTENT: Preparing your concrete surface for coating application is a critical step to ensure a durable, long-lasting finish. Whether you’re planning to enhance your garage, basement, or commercial space in Chardon, OH, proper preparation is key. Here’s a step-by-step guide to help you get started on the right foot.
  1. Clean the Surface Thoroughly
The first and foremost step in preparing your concrete surface is cleaning it thoroughly. Dirt, grease, oil, and other contaminants can prevent the coating from adhering properly.
  • Steps:
    • Sweep and Vacuum: Remove loose dirt and debris.
    • Degrease: Use a degreaser to clean oil and grease stains.
    • Power Wash: Rinse the surface with a power washer to remove any remaining contaminants.
  1. Repair Cracks and Damage
Concrete surfaces often develop cracks and other forms of damage over time. Addressing these issues before applying the coating is essential for a smooth, uniform finish.
  • Steps:
    • Inspect the Surface: Look for cracks, chips, and other damages.
    • Fill Cracks: Use a concrete patching compound to fill in cracks and level the surface.
    • Smooth Rough Areas: Sand down any rough spots to create an even surface.
  1. Test for Moisture
Excess moisture in the concrete can cause coating failures such as blistering and peeling. Conducting a moisture test will help ensure that the surface is ready for coating.
  • Steps:
    • Plastic Sheet Test: Tape a plastic sheet to the concrete and leave it for 24 hours. If condensation forms under the plastic, the concrete is not dry enough.
    • Moisture Meter: Use a moisture meter to get an accurate reading of the moisture content in the concrete.
  1. Etch the Surface
Etching the concrete opens up the pores and creates a rougher texture, which helps the coating adhere better. This step is particularly important for smooth or dense concrete surfaces.
  • Steps:
    • Apply Etching Solution: Use a concrete etching solution according to the manufacturer’s instructions.
    • Scrub: Scrub the surface with a stiff brush to work the solution into the concrete.
    • Rinse Thoroughly: Rinse the surface with water to remove any residue and allow it to dry completely.
  1. Ensure Proper Drying
After cleaning, repairing, and etching, it is crucial to let the concrete surface dry completely before applying the coating. Any residual moisture can compromise the adhesion and performance of the coating.
  • Tips:
    • Allow Sufficient Time: Depending on the weather and humidity, drying times can vary. Ensure the surface is completely dry by allowing it to rest for at least 24-48 hours.
    • Use Fans: In humid conditions, using fans or dehumidifiers can help speed up the drying process.
  1. Prime the Surface (Optional)
Priming the concrete surface can provide an extra layer of adhesion and help the coating last longer. While not always necessary, it can be beneficial for certain types of coatings.
  • Steps:
    • Choose the Right Primer: Select a primer that is compatible with your chosen coating.
    • Apply Evenly: Use a roller or brush to apply the primer evenly over the surface.
    • Allow to Dry: Follow the manufacturer’s instructions for drying times before applying the topcoat.
By following these steps, you can ensure that your concrete surface is properly prepared for coating application, resulting in a beautiful and durable finish. If you need expert assistance with your concrete coating project in Chardon, OH, call J&P Coatings at (440) 517-7789 for a free estimate. Our team is ready to help you achieve the best results for your space!  
Explore Concrete Coating Options
Serving Greater Cleveland, NE Ohio, & Western PA

Thrilled Customers!

5/5

GET FREE QUOTE!

$500 OFF 3 car garage!
& $300 OFF 2 car garage!

BEFORE YOU GO...

$500 OFF 3 car garage!
& $300 OFF 2 car garage!